Selection from the list of topics

What do the numbers stand for?
What is the purpose of the standard error?
When are two results statistically different?
When is it not sufficient to consider only the standard error?
Two types of changes?
Change analyses: When are the results (not) additive?
Why is a dot (“.”) sometimes given in the cells for standard error or estimated value?
Why are no standard error values shown in some tables?
Negative values for growing stock, increment or fellings?

1. What do the numbers stand for?

The tables mainly show results that were calculated using statistical methods from the data of the sample inventory of the National Forest Inventory (NFI). Such results always consist of two figures: (1) the estimated value and (2) the sampling error, the so-called standard error.

Example 1: Estimated value and standard error

NFI5

volume of deadwood (stemwood)
ownership (2 categories)

regional demarcation: production region

unit: m³/ha

evaluation area: accessible forest without shrub forest

grid: 1.4 km grid, subgrids 1-5

state 2018/26
	production region
	Jura		Plateau		Pre-Alps		Alps		Southern Alps		Switzerland
ownership (2 categories)	m³/ha	±%	m³/ha	±%	m³/ha	±%	m³/ha	±%	m³/ha	±%	m³/ha	±%
public	30	10	17	13	37	9	36	6	26	10	30	4
private	27	17	20	12	50	10	32	8	39	13	34	5
total	29estimated value	9standard error	19	9	44	7	35	5	29	8	32	3

The tables usually show the relative (percentage) standard error (“±%”), but occasionally – in the case of estimated percentages – the absolute standard error (“±”).

top

2. What is the purpose of the standard error?

The standard error can be used to define confidence intervals around the estimated value, which contain the true value of the population with a certain statistical certainty.

The statistical certainty is:

68% if the confidence interval is calculated using the standard error
(68% confidence interval = estimated value ± standard error), and
95% if the confidence interval is calculated using twice the standard error
(95% confidence interval = estimated value ± 2 × standard error*)

Example 2: Calculating confidence intervals

LFI5
volume of deadwood (stemwood)
ownership (2 categories)
regional demarcation: production region
unit: m³/ha
evaluation area: accessible forest without shrub forest
grid: 1.4 km grid, subgrids 1-5
state 2018/26
	production region
	Jura
ownership (2 classes)	m³/ha	±%
public	30	10
private	27	17
total	29	9

Question
What are the 68% and 95% confidence intervals of the above estimates?

Procedure

Calculate the absolute standard error (= relative standard error × estimated value / 100)
Calculate the confidence intervals
- 68% confidence interval = estimated value ± absolute standard error
- 95% confidence interval = estimated value ± 2 × absolute standard error

Answer

			Step 1	Step 2

ownership (2 categories)	volume of deadwood Jura NFI5
	estimated value	standard error		confidence interval
		relative	absolute	68%	95%
	m³/ha	±%	±m³/ha	m³/ha	m³/ha
public	30	10	3	27-33	24-36
private	27	17	5	22-32	17-37
total	29	9	3	26-32calculated with the standard error, i.e. 29 ± 3	23-25calculated with twice the standard error, i.e. 29 ± 2 × 3

The volume of deadwood in the Jura is between 26 and 32 m³/ha with a statistical certainty of 68% and between 23 and 35 m³/ha with a statistical certainty of 95%.

The 95% confidence interval is larger than the 68% confidence interval. This results in higher statistical certainty with the 95% confidence interval.

Example 3: Visualisation of the 68% and 95% confidence intervals

Data: see example 2

When interpreting the results, one must define the level of statistical certainty that one would like to apply to the statement.

The 68% confidence interval is generally used in the National Forest Inventory (NFI).

top

3. When are two results statistically different?*

This can be checked by comparing the confidence intervals of two estimated values:

If the 68% confidence intervals of two estimates do not overlap, it can be assumed with some certainty that the two populations differ.
If the 95% confidence intervals of two estimates do not overlap, it can be assumed with high certainty that the two populations differ.

Example 4: Interpretation of two results from the same inventory

NFI5
growing stock (stemwood)
ownership (2 categories)
regional demarcation: production region
unit: m³/ha
evaluation area: accessible forest without shrub forest
grid: 1.4 km grid, subgrids 1-5
state 2018/26
	production region
	Jura		Plateau		Pre-Alps		Alps		Southern Alps		Switzerland
ownership (2 categories)	m³/ha	±%	m³/ha	±%	m³/ha	±%	m³/ha	±%	m³/ha	±%	m³/ha	±%
public	331	3	311	3	405	4	300	3	256	5	314	2
private	387	5	432	4	454	4	348	4	285	6	398	2
total	345	2	363	2	431	2	314	2	262	4	343	1

	case 2						case 1

case 1

Question
Is the growing stock per hectare greater in the Alps than in the Southern Alps?

Procedure

Calculate the absolute standard errors
Calculate the confidence intervals depending on the desired level of statistical certainty:
- 68% confidence intervals (some certainty; absolute standard error)
- 95% confidence intervals (high certainty; twice the absolute standard error)
Assess whether the confidence intervals corresponding to the desired level of statistical certainty do not overlap

Answer

ownership (2 categories)	growing stock NFI5
	Alps					Southern Alps
	estimated value	standard error		confidence interval		estimated value	standard error		confidence interval
		relative	absolute	68%	95%		relative	absolute	68%	95%
	m³/ha	±%	±m³/ha	m³/ha	m³/ha	m³/ha	±%	±m³/ha	m³/ha	m³/ha
total	314	2	6	308-320	302-326	262	4	10	252-272	242-282

Neither the 68%-confidence intervals nor the 95%-confidence intervals overlap (pairs of values in ).

In this case, the level of statistical certainty selected has no influence on the result.

Overall, this means that there is high statistical certainty that the growing stock per hectare is greater in the Alps than in the Southern Alps.

Case 2

Question
Is the growing stock per hectare greater in the Plateau than in the Jura?

Procedure

See case 1.

Answer

ownership (2 categories)	growing stock NFI5
	Jura					Plateau
	estimated value	standard error		confidence interval		estimated value	standard error		confidence interval
		relative	absolute	68%	95%		relative	absolute	68%	95%
	m³/ha	±%	±m³/ha	m³/ha	m³/ha	m³/ha	±%	±m³/ha	m³/ha	m³/ha
total	345	2	7	338-352	331-359	363	2	7	356-370	349-377

The 68%-confidence intervals do not overlap (pairs of values in ).
In contrast, the 95%-confidence intervals overlap (pairs of values in ).

In this case, the level of statistical certainty selected has an influence on the interpretation of the results. At the 68% confidence interval level, the conclusion is that the growing stock per hectare is higher in the Plateau than in the Jura. At the 95% confidence interval level, however, this conclusion cannot be drawn.

Considering both confidence interval levels, it can be said that there is some, but not high, statistical certainty that the growing stock per hectare is greater in the Plateau than in the Jura.

The confidence intervals can also be used to determine whether a value estimated with a sample from the National Forest Inventory (NFI) deviates from a target value (e.g. from Swiss forest policy) or whether a change between two inventories is statistically certain.

Example 5: Interpretation of two results from different inventories

ownership (2 categories)	growing stock Plateau*
	NFI4		NFI5
	m³/ha	±%	m³/ha	±%
public	340	3	309	3
private	447	4	432	4
total	386	2	363	2
* accessible forest without shrub forest NFI4/NFI5

Question
Has the growing stock per hectare in the Plateau decreased from NFI4 to NFI5?

Procedure

Calculate the absolute standard errors
Calculate the confidence intervals depending on the desired level of statistical certainty:
- 68% confidence intervals (some certainty; absolute standard error)
- 95% confidence intervals (high certainty; twice the absolute standard error)
Assess whether the confidence intervals corresponding to the desired level of statistical certainty do not overlap.

Answer

ownership (2 categories)	growing stock Plateau*
	NFI4					NFI5
	estimated value	standard error		confidence interval		estimated value	standard error		confidence interval
		relative	absolute	68%	95%		relative	absolute	68%	95%
	m³/ha	±%	±	m³/ha	m³/ha	m³/ha	±%	±	m³/ha	m³/ha
public	340	3	11	329-351	318-362	309	3	11	298-320	287-331
private	447	4	16	431-463	415-479	432	4	17	415-449	398-466
total	386	2	8	378-394	370-402	363	2	9	354-372	345-381
* accessible forest without shrub forest NFI4/NFI5

The 68%-confidence intervals do not overlap in the public forest (pairs of values in ), but they do in the private forest and the total forest (pairs of values in ). At the certainty level of the 68% confidence intervals, it can be concluded that the growing stock per hectare in the public forest of the Plateau has decreased. For the private forest, as well as for the total forest, the decrease is not statistically certain at this level.

The 95%-confidence intervals overlap in all three categories. At the certainty level of the 95% confidence intervals, it is therefore not certain that the growing stock has decreased, even for the public forest.

See also examples 6 and 7, in which changes between two inventories are interpreted using the more sensitive metric of net change.

For many target variables in the NFI, it is possible to determine whether a change between two inventories is statistically certain, not only by comparing the states in the two inventories (see example 5), but also by analysing the net change** between the two inventories.

To do this, one must first define the level of statistical certainty that one would like to apply to the statement (as done above):

A net change has occurred with some certainty if the relative standard error is less than 100% or if the confidence interval calculated with the absolute standard error (68% confidence interval) does not include the value 0.
A net change has occurred with high certainty if twice the relative standard error is less than 100% or if the confidence interval calculated with twice the absolute standard error (95% confidence interval) does not include the value 0.

Example 6: Interpretation of net changes with the relative standard error

ownership (2 categories)	change in growing stock from NFI4 to NFI5, Plateau*
	estimated value	standard error
	m³/ha	±%
public	-34	30
private	-9	147
total	-23	34
* accessible forest without shrub forest NFI4/NFI5

Question
Has the growing stock per hectare in the Plateau decreased from NFI4 to NFI5?

Procedure

Define the level of statistical certainty (68% or 95% confidence interval)
Determine whether:
- the relative standard error is less than 100% (certainty level of the 68% confidence interval)
- twice the relative standard error is less than 100% (certainty level of the 95% confidence interval)

Answer

ownership (2 categories)	change in growing stock from NFI4 to NFI5, Plateau*
	estimated value	standard error
		single	double
	m³/ha	±%	±%
public	-34	30	60
private	-9	147	294
total	-23	34	68
* accessible forest without shrub forest NFI4/NFI5

The single relative standard error is less than 100% for both the public forest and the total forest (highlighted values). For the private forest, however, it is greater than 100% (highlighted values). At the certainty level of the 68% confidence interval, it can be concluded that the growing stock in the Plateau has decreased in the public forest and in total. For the private forest, on the other hand, the decrease in stock is not statistically certain at this level.

The same conclusion is reached in this example with the certainty level of the 95% confidence interval, as twice the relative standard error is again less than 100% for both the public forest and the total forest.

Overall, this means that there is high statistical certainty that the growing stock per hectare has decreased in the public forest in the Plateau, as well as overall. For private forests, on the other hand, the decrease in stock is not statistically certain (as twice the relative standard error and the relative standard error are both less than 100%).

Example 7: Interpretation of net changes with the absolute standard error

ownership (2 categories)	change in growing stock from NFI4 to NFI5, Plateau*
	estimated value	standard error
	%	±
public	-10	3
private	-2	3
total	-6	2
* accessible forest without shrub forest NFI4/NFI5

Question
Has the growing stock per hectare in the Plateau decreased from NFI4 to NFI5?

Procedure

Define the level of statistical certainty (68% or 95% confidence interval)
Calculate the confidence interval based on the defined certainty level
- 68% confidence interval with the absolute standard error
- 95% confidence interval with twice the absolute standard error
Determine whether the corresponding confidence interval does not include the value 0

Answer

ownership (2 categories)	change in growing stock from NFI4 to NFI5, Plateau*
	estimated value	standard error		confidence interval
		single	double	68%	95%
	%	±	±	%	%
public	-10	3	6	-13 to -7	-16 to -4
private	-2	3	6	-5 to +1	-8 to +4
total	-6	2	4	-8 to -4	-10 to -2
* accessible forest without shrub forest NFI4/NFI5

Neither the 68% nor the 95% confidence interval includes the value 0 for the public forest or for the total forest. At both certainty levels, this leads to the conclusion that the growing stock in the Plateau has decreased in the public forest and in total. For the private forest, on the other hand, the decrease in stock is not statistically certain (as the confidence intervals include the value 0).

Net changes can be interpreted using the absolute or relative standard error (see examples 6 and 7). It is advisable to use the absolute standard error if the estimated value in the table is shown as a percentage (%; as in example 7), and the relative standard error if the estimated value in the table is shown in absolute terms (m³, m³/ha, pc, m²; as in example 6). This means that the standard error can be taken directly from the table and does not need to be converted.

To assess whether a change is statistically certain, it is advisable to analyse the net change between the two inventories wherever possible. Net changes are more sensitive than status comparisons, which makes it easier to detect differences statistically. See examples 6 and 7 (net change) and 7 (comparison of two results from different inventories).

top

4. When is it not sufficient to consider only the standard error?

The National Forest Inventory (NFI) is a sample-based large-scale inventory whose sample areas are arranged on a grid with a mesh size of 1.4 km × 1.4 km. The NFI was designed in such a way that the growing stock for Switzerland as a whole can be predicted with a maximum standard error of 1%.

If results are requested for individual regions or for individual classes, the standard error quickly becomes much larger. This is because the number of sample areas and subjects (e.g. sample trees, young forest plants, pieces of deadwood) analysed for the queried combination of variable expressions* is considerably lower than for the total.

Example 8: Standard error and combination of variable expressions

region	growing stock
	total		maple		sycamore		Norway maple
	estimated value	standard error	estimated value	standard error	estimated value	standard error	estimated value	standard error
	m³/ha	±%	m³/ha	±%	m³/ha	±%	m³/ha	±%
Switzerland	343	1	12	5	11	5	1	20
production region "Plateau"	363	2	15	10	14	11	0	50
Canton of Aargau	289	7	15	20	13	20	1	63

The standard error increases as the level of detail increases.

Large standard errors are to be expected if:

forest districts are selected as the regional demarcation or results for small cantons (e.g. Appenzell Innerrhoden, Nidwalden) are queried,
a classification variable with many classes is selected (e.g. tree species in 56 classes),
several classification variables are combined with each other (e.g. main tree species and development stage).

Large standard errors are an indication that the estimate may have been based on too small a number of sample areas or subjects and that the result of the estimate therefore may not be reliable.

For the target variable “number of stems of young forest plants with browsing damage” (browsing intensity), an uncertain estimate is not necessarily recognisable by a large standard error. This is because this target variable is a quotient estimator**, which is – due to the survey method – only based on a small number of assessed young forest plants for rarer tree species (e.g. pine, larch, Arolla pine, oak, chestnut). Accordingly, for this target variable one should always check how many young forest plants were assessed for the individual estimates. As a rule of thumb, at least 30 young forest plants per estimate should have been assessed for browsing in order to obtain a reliable estimate.

top

5. Two types of changes?

There are two types of changes in the National Forest Inventory (NFI):

The first type of change involves specific target variables for change components such as increment, fellings or mortality. These target variables are only available for two consecutive measurement cycles, e.g. NFI4 to NFI5. When change components are analysed, the classification variable expression of the second measurement cycle is generally assigned to the first measurement cycle. These analyses therefore do not take into account any change in the expression (e.g. from private to public ownership) from the earlier to the later measurement cycle.
In the second type of change, the difference in target variables, such as stem number, growing stock or forest area, is used to calculate the net change between two measurement cycles. These target variables are usually used to represent states, e.g. that in NFI5, but can also show the net change between any two measurement cycles, e.g. between NFI1 and NFI5. In these net change analyses, the change in expression is taken into account for some of the classification variables, including “tree condition” and “forest, non-forest”. In this way, it can be seen, for example, that the forest area has increased. For the remaining classification variables, the expressions are regarded as static. This means that the most recent state – whether it was assessed in a measurement cycle (e.g. “primary forest function NFI5”) or taken from an external data source (e.g. “protection forest [2022]”) – is assigned to all measurement cycles.

top

6. Change analyses: When are the results (not) additive?

The results are:

additive if they are reported as the total change between two measurement dates. For example, the fellings for the various production regions reported in cubic metres (m³) can be added together to obtain the total fellings for Switzerland.
not additive if they are reported as a change per year (e.g. m³/year). For example, the fellings for the various production regions reported in cubic metres per year (m³/year) cannot be added together to obtain the total fellings for Switzerland.

Example 9: : Additivity/non-additivity of changes

	growing stock: total change between NFI4 and NFI5 (in 1000 m³)*
	Jura		Plateau		Pre-Alps		Alps		Southern Alps		Switzerland
higher/lower altitude zone	1000 m³	±%	1000 m³	±%	1000 m³	±%	1000 m³	±%	1000 m³	±%	1000 m³	±%
lower altitude zone	-3759.0	28	-4909.1	36	-1025.2	133	-317.1	195	3464.1	31	-6546.3	42
higher altitude zone	574.3	117	-328.0	62	1093.0	123	7128.4	21	666.7	93	9134.3	24
total	-3184.7	40	-5237.1	34	67.9	2805	6811.3	23	4130.8	30	2588.1	136
	* accessible forest without shrub forest NFI4/NFI5
	additive

	growing stock: annual change between NFI4 and NFI5 (in 1000 m³/year)*
	Jura		Plateau		Pre-Alps		Alps		Southern Alps		Switzerland
higher/lower altitude zone	1000 m³/year	±%	1000 m³/year	±%	1000 m³/year	±%	1000 m³/year	±%	1000 m³/year	±%	1000 m³/year	±%
lower altitude zone	-421.1	28	-560.6	36	-115.7	133	-35.9	195	389.5	31	-740.7	42
higher altitude zone	64.7	117	-38.3	62	122.4	123	810.4	21	74.9	93	1032.7	24
total	-357.3	40	-598.4	34	7.6	2805	773.8	23	464.4	30	292.7	136
	* accessible forest without shrub forest NFI4/NFI5
	not additive

The non-additivity of changes expressed per year arises because the total change is divided by the average number of years between the two measurement dates in the domain* under consideration, and this average number of years varies slightly depending on the domain.

Example 10: Average number of years per domain

domain		mean number of years*
production region	higher/lower altitude zone
Mittelland	-	8.75
Plateau	higher altitude zone	8.56
Plateau	lower altitude zone	8.76
Southern Alps	-	8.90
Southern Alps	higher altitude zone	8.90
Southern Alps	lower altitude zone	8.89
* between the NFI4 and NFI5 measurements in the accessible forest without shrub forest

top

7. Why is a dot (“.”) sometimes given in the cells for standard error or estimated value?

In the calculation of a results table, data is not always available for all combinations of variable expressions*. In most cases, this indicates that the variable estimated with the relevant target variable does not occur or only occurs very rarely. The value 0 is then usually used. However, as this value is not based on any direct measurements, a dot (“.”) is given for the associated standard error. If reference is made to the assumed value of 0 in the calculation, e.g. in the case of percentages or certain change estimates, no value can be used. In this case, a dot (“.”) is given for the estimated value and the standard error.

For example, no Arolla pines have yet been found and measured in the Plateau in the National Forest Inventory (NFI) (growing stock of Arolla pine by production region). It can therefore be assumed that the values are missing because the Arolla pine actually does not occur in the Plateau, and therefore the growing stock in that region must be 0.

top

8. Why are no standard error values shown in some tables?

The data in these tables originates from a complete survey and not from a sample inventory. Accordingly, it is not necessary to specify a standard error because there is no uncertainty due to sampling.

The forest road network survey that the National Forest Inventory (NFI) periodically carries out with the local forestry services is an example of such a complete survey.

top

9. Negative values for growing stock, increment or fellings?

A negative value is possible if the result could only be calculated on the basis of a few trees. The estimate is therefore not reliable. This is also reflected in the standard error, which is usually extremely large for negative stock, increment or felling values.

Negative values can occur because, when the stemwood volume of the tally trees is determined, the volume estimated solely on the basis of the diameter at breast height (DBH) (tariff volume) is adjusted using the volume of the tally trees estimated on the basis of DBH, diameter at 7 m height and tree height. This procedure enables an unbiased and more accurate calculation of the stemwood volume. However, it can lead to negative values for all target variables that are based on the stemwood volume of the tally trees (e.g. growing stock, increment, fellings) if the number of tally trees in the selected combination of variable expressions* is small.

top

NFI1
total number of stems NFI1
diameter at breast height (10 classes) · main tree species
regional demarcation: protection forest region
unit: 1000 n
evaluation area: accessible forest without shrub forest
grid: 1.4-km grid
state 1983/85
		protection forest region
		Jura + Plateau		Northwestern Alps		Northeastern Alps		Southwestern Alps		Southeastern Alps		Southern Alps		Switzerland
diameter at breast height (10 classes)	main tree species	1000 n	±%	1000 n	±%	1000 n	±%	1000 n	±%	1000 n	±%	1000 n	±%	1000 n	±%
n/a	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	spruce	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	fir	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	pine	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	larch	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	Arolla pine	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	other conifers	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	beech	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	maple	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	ash	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	oak	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	sweet chestnut	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	other broadleaves	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	indeterminable	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	0	.	0	.	0	.	0	.	0	.	0	.	0	.
12-20 cm	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	spruce	22256	6	19058	6	10652	8	7622	9	11990	7	3307	13	74886	3
	fir	12883	6	6320	8	3033	11	1109	25	487	24	509	26	24341	4
	pine	1120	21	579	38	374	32	3822	17	3234	18	126	47	9255	10
	larch	513	38	71	47	82	49	2955	13	1255	16	1677	15	6552	8
	Arolla pine	0	.	43	100	10	100	612	28	850	22	0	.	1515	17
	other conifers	901	23	50	53	168	31	51	100	347	51	0	.	1517	19
	beech	24378	4	7109	8	5983	10	1272	25	1060	21	6601	11	46403	3
	maple	4963	9	2472	11	1835	14	456	27	210	35	421	22	10356	6
	ash	4881	9	1790	18	1909	15	383	29	335	49	1221	18	10519	6
	oak	3455	16	422	33	89	39	412	28	69	59	1336	25	5782	12
	sweet chestnut	49	82	0	.	20	100	51	72	0	.	8005	11	8125	11
	other broadleaves	8017	8	4048	11	3281	16	3324	15	2022	17	9157	8	29849	4
	indeterminable	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	83416	3	41962	4	27435	6	22070	6	21858	6	32360	5	229101	2
21-30 cm	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	spruce	13104	5	12550	6	8267	8	5501	9	8584	7	2376	13	50382	3
	fir	7941	6	3619	9	2194	12	390	26	224	27	208	34	14576	4
	pine	1363	15	313	31	498	30	1910	16	1635	16	220	46	5939	8
	larch	356	26	30	58	76	56	2073	12	1240	14	1275	16	5050	7
	Arolla pine	0	.	43	100	40	71	638	24	636	21	10	100	1367	15
	other conifers	147	29	0	.	20	71	0	.	20	71	0	.	187	25
	beech	16128	4	3905	9	3589	10	417	28	457	27	2416	11	26912	3
	maple	3089	7	1072	13	1338	12	110	32	120	36	152	33	5881	5
	ash	3058	8	701	17	1032	17	155	35	110	59	327	27	5383	7
	oak	2438	11	207	39	53	66	90	45	30	100	583	26	3401	10
	sweet chestnut	78	88	0	.	0	.	20	71	9	100	2440	13	2547	13
	other broadleaves	3240	9	644	16	869	16	603	23	456	29	2690	11	8502	6
	indeterminable	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	50942	2	23083	4	17976	5	11907	6	13522	6	12698	5	130128	2
31-40 cm	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	spruce	11689	4	9727	5	5494	7	3114	9	5587	7	1608	13	37218	2
	fir	5633	5	2365	9	1434	11	261	26	161	24	215	33	10069	4
	pine	2171	10	136	32	226	31	607	18	874	16	148	53	4163	7
	larch	268	21	44	41	106	48	1425	11	1086	13	833	14	3763	7
	Arolla pine	0	.	13	74	4	100	275	23	472	20	5	100	768	15
	other conifers	74	43	0	.	0	.	10	100	0	.	0	.	85	40
	beech	8974	4	2181	10	2164	10	79	44	173	31	835	13	14406	3
	maple	1021	11	380	20	437	17	23	72	13	58	26	54	1900	8
	ash	1555	9	304	21	387	21	30	72	9	100	62	45	2347	8
	oak	1127	11	45	51	14	58	0	.	39	61	231	28	1456	10
	sweet chestnut	0	.	0	.	0	.	32	58	4	100	612	16	647	15
	other broadleaves	930	11	252	27	157	25	119	36	75	49	586	16	2119	8
	indeterminable	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	33443	2	15447	4	10423	5	5974	6	8492	6	5162	6	78940	1
41-50 cm	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	spruce	7391	4	5710	5	3539	7	1592	9	3275	6	1050	10	22557	2
	fir	3160	6	1657	8	807	11	129	28	130	27	171	25	6053	4
	pine	1261	9	142	39	104	31	209	25	393	16	23	71	2132	7
	larch	148	21	47	38	54	42	992	10	719	12	498	12	2457	6
	Arolla pine	0	.	0	.	0	.	100	27	211	21	4	100	315	16
	other conifers	79	50	0	.	0	.	0	.	0	.	0	.	79	50
	beech	4123	5	1019	11	851	11	29	54	125	28	322	15	6469	4
	maple	287	14	112	22	98	24	0	.	12	58	4	100	514	10
	ash	489	12	51	35	110	24	0	.	4	100	10	72	664	10
	oak	598	12	17	50	4	100	16	62	33	50	34	38	702	11
	sweet chestnut	4	100	0	.	0	.	4	100	4	100	383	17	395	17
	other broadleaves	263	17	66	33	41	32	39	48	4	100	70	28	483	12
	indeterminable	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	17802	2	8821	4	5608	5	3111	7	4911	5	2568	6	42820	2
51-60 cm	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	spruce	3159	5	2578	6	1606	8	806	11	1571	8	473	13	10193	3
	fir	1150	8	763	10	361	14	67	35	71	29	72	31	2485	5
	pine	415	13	20	76	20	72	79	48	122	26	15	50	671	11
	larch	74	23	60	35	42	44	567	12	359	14	274	14	1377	7
	Arolla pine	0	.	0	.	4	100	19	53	99	24	0	.	122	21
	other conifers	29	42	0	.	0	.	0	.	0	.	0	.	29	42
	beech	1232	7	469	14	293	16	12	74	38	48	135	24	2179	6
	maple	77	26	20	45	25	47	0	.	4	100	0	.	125	20
	ash	172	18	13	58	17	50	0	.	7	100	0	.	209	16
	oak	304	15	10	71	9	71	0	.	4	100	26	61	353	14
	sweet chestnut	0	.	0	.	0	.	4	100	0	.	146	21	150	21
	other broadleaves	95	24	25	47	9	100	12	75	0	.	38	34	178	17
	indeterminable	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	6706	3	3958	5	2386	7	1567	8	2276	6	1179	7	18071	2
61-70 cm	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	spruce	795	8	785	9	569	12	178	21	509	11	195	20	3031	5
	fir	311	12	279	15	80	25	11	58	15	61	33	39	729	8
	pine	58	31	15	59	4	100	4	100	30	46	0	.	111	22
	larch	23	47	4	100	14	58	209	18	132	21	82	26	463	11
	Arolla pine	0	.	0	.	0	.	11	58	32	40	0	.	43	33
	other conifers	12	58	4	100	0	.	0	.	0	.	0	.	16	50
	beech	408	12	90	26	40	36	8	71	19	53	53	28	618	10
	maple	22	45	0	.	4	100	0	.	0	.	0	.	26	41
	ash	33	39	0	.	4	100	0	.	0	.	0	.	37	37
	oak	78	27	7	100	18	59	0	.	0	.	5	100	108	23
	sweet chestnut	0	.	0	.	0	.	0	.	0	.	54	32	54	32
	other broadleaves	11	58	4	100	5	100	4	100	0	.	8	71	33	36
	indeterminable	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	1751	6	1188	7	739	11	425	13	736	9	430	12	5269	3
71-80 cm	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	spruce	232	15	225	15	222	19	85	27	195	16	104	23	1064	7
	fir	134	19	105	22	29	43	4	100	12	58	16	60	301	13
	pine	4	100	0	.	0	.	0	.	4	100	0	.	8	71
	larch	8	71	0	.	0	.	98	24	45	30	32	35	182	17
	Arolla pine	0	.	0	.	0	.	23	47	28	43	0	.	51	32
	other conifers	4	100	0	.	0	.	0	.	0	.	0	.	4	100
	beech	84	24	18	50	13	58	4	100	0	.	37	46	156	19
	maple	6	100	4	100	13	59	0	.	0	.	4	100	26	42
	ash	18	51	0	.	0	.	0	.	0	.	0	.	18	51
	oak	47	30	0	.	4	100	0	.	0	.	0	.	51	29
	sweet chestnut	0	.	0	.	0	.	4	100	0	.	80	37	84	35
	other broadleaves	4	100	0	.	0	.	0	.	0	.	0	.	4	100
	indeterminable	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	540	10	352	13	281	16	218	16	284	13	273	16	1946	6
81-90 cm	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	spruce	45	30	29	38	73	26	24	41	35	33	27	38	233	14
	fir	16	50	50	29	4	100	4	100	4	100	10	72	88	22
	pine	4	100	0	.	0	.	0	.	0	.	0	.	4	100
	larch	4	100	0	.	0	.	29	38	25	41	9	71	66	25
	Arolla pine	0	.	0	.	0	.	4	100	4	100	0	.	8	71
	other conifers	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	beech	51	29	4	100	4	100	0	.	7	71	4	100	71	24
	maple	0	.	8	71	0	.	0	.	0	.	0	.	8	71
	ash	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	oak	28	38	0	.	0	.	0	.	0	.	0	.	28	38
	sweet chestnut	0	.	0	.	0	.	0	.	0	.	31	38	31	38
	other broadleaves	5	100	0	.	0	.	0	.	0	.	0	.	5	100
	indeterminable	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	153	17	91	21	81	24	60	26	76	23	81	24	542	9
91-100 cm	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	spruce	16	50	15	50	20	45	0	.	25	47	8	71	85	23
	fir	11	58	8	71	8	71	0	.	4	100	0	.	32	35
	pine	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	larch	0	.	0	.	0	.	12	58	0	.	4	100	16	50
	Arolla pine	0	.	0	.	0	.	4	100	0	.	0	.	4	100
	other conifers	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	beech	8	71	0	.	0	.	0	.	0	.	0	.	8	71
	maple	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	ash	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	oak	7	71	0	.	0	.	0	.	0	.	0	.	7	71
	sweet chestnut	0	.	0	.	0	.	0	.	4	100	36	39	40	37
	other broadleaves	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	indeterminable	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	43	30	24	41	28	38	16	50	33	39	48	33	192	15
>100 cm	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	spruce	0	.	18	63	7	71	8	71	4	100	12	75	49	34
	fir	4	100	4	100	0	.	0	.	0	.	15	59	23	46
	pine	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	larch	0	.	0	.	0	.	4	100	8	71	8	71	20	45
	Arolla pine	0	.	0	.	0	.	4	100	4	100	0	.	8	71
	other conifers	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	beech	0	.	0	.	0	.	0	.	0	.	4	100	4	100
	maple	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	ash	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	oak	4	100	0	.	0	.	0	.	0	.	0	.	4	100
	sweet chestnut	0	.	0	.	0	.	0	.	0	.	59	34	59	34
	other broadleaves	5	100	0	.	0	.	0	.	0	.	4	100	9	71
	indeterminable	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	12	59	22	54	7	71	16	50	16	50	101	24	175	18
total	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	spruce	58687	3	50696	4	30449	6	18930	7	31775	5	9161	9	199698	2
	fir	31243	4	15171	6	7951	9	1976	21	1108	20	1249	21	58696	3
	pine	6396	8	1205	28	1226	24	6632	14	6292	13	533	40	22284	6
	larch	1392	19	257	27	374	31	8363	8	4869	9	4691	10	19946	5
	Arolla pine	0	.	98	95	59	72	1690	19	2335	16	19	82	4202	12
	other conifers	1246	20	55	50	187	31	62	85	367	49	0	.	1917	16
	beech	55387	3	14796	7	12937	8	1820	23	1880	19	10406	10	97226	2
	maple	9464	6	4066	9	3750	10	590	25	358	27	607	23	18835	4
	ash	10205	6	2858	14	3459	13	568	26	465	47	1621	17	19175	5
	oak	8087	9	708	28	189	30	518	28	175	59	2215	20	11892	8
	sweet chestnut	131	86	0	.	20	100	114	53	21	83	11845	10	12131	9
	other broadleaves	12571	6	5038	10	4362	14	4102	15	2557	17	12553	8	41183	4
	indeterminable	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	194808	1	94948	3	64963	4	45364	5	52202	4	54900	3	507185	1

Table citation

Abegg, M.; Ahles, P.; Allgaier Leuch, B.; Cioldi, F.; Didion, M.; Düggelin, C.; Fischer, C.; Herold, A.; Meile, R.; Rohner, B.; Rösler, E.; Speich, S.; Temperli, C.; Traub, B.,
2023: Swiss national forest inventory - Result table No. 1344351. Birmensdorf, Swiss Federal Research Institute WSL

back