Selection from the list of topics

What do the numbers stand for?
What is the purpose of the standard error?
When are two results statistically different?
When is it not sufficient to consider only the standard error?
Two types of changes?
Change analyses: When are the results (not) additive?
Why is a dot (“.”) sometimes given in the cells for standard error or estimated value?
Why are no standard error values shown in some tables?
Negative values for growing stock, increment or fellings?

1. What do the numbers stand for?

The tables mainly show results that were calculated using statistical methods from the data of the sample inventory of the National Forest Inventory (NFI). Such results always consist of two figures: (1) the estimated value and (2) the sampling error, the so-called standard error.

Example 1: Estimated value and standard error

NFI5

volume of deadwood (stemwood)
ownership (2 categories)

regional demarcation: production region

unit: m³/ha

evaluation area: accessible forest without shrub forest

grid: 1.4 km grid, subgrids 1-5

state 2018/26
	production region
	Jura		Plateau		Pre-Alps		Alps		Southern Alps		Switzerland
ownership (2 categories)	m³/ha	±%	m³/ha	±%	m³/ha	±%	m³/ha	±%	m³/ha	±%	m³/ha	±%
public	30	10	17	13	37	9	36	6	26	10	30	4
private	27	17	20	12	50	10	32	8	39	13	34	5
total	29estimated value	9standard error	19	9	44	7	35	5	29	8	32	3

The tables usually show the relative (percentage) standard error (“±%”), but occasionally – in the case of estimated percentages – the absolute standard error (“±”).

top

2. What is the purpose of the standard error?

The standard error can be used to define confidence intervals around the estimated value, which contain the true value of the population with a certain statistical certainty.

The statistical certainty is:

68% if the confidence interval is calculated using the standard error
(68% confidence interval = estimated value ± standard error), and
95% if the confidence interval is calculated using twice the standard error
(95% confidence interval = estimated value ± 2 × standard error*)

Example 2: Calculating confidence intervals

LFI5
volume of deadwood (stemwood)
ownership (2 categories)
regional demarcation: production region
unit: m³/ha
evaluation area: accessible forest without shrub forest
grid: 1.4 km grid, subgrids 1-5
state 2018/26
	production region
	Jura
ownership (2 classes)	m³/ha	±%
public	30	10
private	27	17
total	29	9

Question
What are the 68% and 95% confidence intervals of the above estimates?

Procedure

Calculate the absolute standard error (= relative standard error × estimated value / 100)
Calculate the confidence intervals
- 68% confidence interval = estimated value ± absolute standard error
- 95% confidence interval = estimated value ± 2 × absolute standard error

Answer

			Step 1	Step 2

ownership (2 categories)	volume of deadwood Jura NFI5
	estimated value	standard error		confidence interval
		relative	absolute	68%	95%
	m³/ha	±%	±m³/ha	m³/ha	m³/ha
public	30	10	3	27-33	24-36
private	27	17	5	22-32	17-37
total	29	9	3	26-32calculated with the standard error, i.e. 29 ± 3	23-35calculated with twice the standard error, i.e. 29 ± 2 × 3

The volume of deadwood in the Jura is between 26 and 32 m³/ha with a statistical certainty of 68% and between 23 and 35 m³/ha with a statistical certainty of 95%.

The 95% confidence interval is larger than the 68% confidence interval. This results in higher statistical certainty with the 95% confidence interval.

Example 3: Visualisation of the 68% and 95% confidence intervals

Data: see example 2

When interpreting the results, one must define the level of statistical certainty that one would like to apply to the statement.

The 68% confidence interval is generally used in the National Forest Inventory (NFI).

top

3. When are two results statistically different?*

This can be checked by comparing the confidence intervals of two estimated values:

If the 68% confidence intervals of two estimates do not overlap, it can be assumed with some certainty that the two populations differ.
If the 95% confidence intervals of two estimates do not overlap, it can be assumed with high certainty that the two populations differ.

Example 4: Interpretation of two results from the same inventory

NFI5
growing stock (stemwood)
ownership (2 categories)
regional demarcation: production region
unit: m³/ha
evaluation area: accessible forest without shrub forest
grid: 1.4 km grid, subgrids 1-5
state 2018/26
	production region
	Jura		Plateau		Pre-Alps		Alps		Southern Alps		Switzerland
ownership (2 categories)	m³/ha	±%	m³/ha	±%	m³/ha	±%	m³/ha	±%	m³/ha	±%	m³/ha	±%
public	331	3	311	3	405	4	300	3	256	5	314	2
private	387	5	432	4	454	4	348	4	285	6	398	2
total	345	2	363	2	431	2	314	2	262	4	343	1

	case 2						case 1

case 1

Question
Is the growing stock per hectare greater in the Alps than in the Southern Alps?

Procedure

Calculate the absolute standard errors
Calculate the confidence intervals depending on the desired level of statistical certainty:
- 68% confidence intervals (some certainty; absolute standard error)
- 95% confidence intervals (high certainty; twice the absolute standard error)
Assess whether the confidence intervals corresponding to the desired level of statistical certainty do not overlap

Answer

ownership (2 categories)	growing stock NFI5
	Alps					Southern Alps
	estimated value	standard error		confidence interval		estimated value	standard error		confidence interval
		relative	absolute	68%	95%		relative	absolute	68%	95%
	m³/ha	±%	±m³/ha	m³/ha	m³/ha	m³/ha	±%	±m³/ha	m³/ha	m³/ha
total	314	2	6	308-320	302-326	262	4	10	252-272	242-282

Neither the 68%-confidence intervals nor the 95%-confidence intervals overlap (pairs of values in ).

In this case, the level of statistical certainty selected has no influence on the result.

Overall, this means that there is high statistical certainty that the growing stock per hectare is greater in the Alps than in the Southern Alps.

Case 2

Question
Is the growing stock per hectare greater in the Plateau than in the Jura?

Procedure

See case 1.

Answer

ownership (2 categories)	growing stock NFI5
	Jura					Plateau
	estimated value	standard error		confidence interval		estimated value	standard error		confidence interval
		relative	absolute	68%	95%		relative	absolute	68%	95%
	m³/ha	±%	±m³/ha	m³/ha	m³/ha	m³/ha	±%	±m³/ha	m³/ha	m³/ha
total	345	2	7	338-352	331-359	363	2	7	356-370	349-377

The 68%-confidence intervals do not overlap (pairs of values in ).
In contrast, the 95%-confidence intervals overlap (pairs of values in ).

In this case, the level of statistical certainty selected has an influence on the interpretation of the results. At the 68% confidence interval level, the conclusion is that the growing stock per hectare is higher in the Plateau than in the Jura. At the 95% confidence interval level, however, this conclusion cannot be drawn.

Considering both confidence interval levels, it can be said that there is some, but not high, statistical certainty that the growing stock per hectare is greater in the Plateau than in the Jura.

The confidence intervals can also be used to determine whether a value estimated with a sample from the National Forest Inventory (NFI) deviates from a target value (e.g. from Swiss forest policy) or whether a change between two inventories is statistically certain.

Example 5: Interpretation of two results from different inventories

ownership (2 categories)	growing stock Plateau*
	NFI4		NFI5
	m³/ha	±%	m³/ha	±%
public	340	3	309	3
private	447	4	432	4
total	386	2	363	2
* accessible forest without shrub forest NFI4/NFI5

Question
Has the growing stock per hectare in the Plateau decreased from NFI4 to NFI5?

Procedure

Calculate the absolute standard errors
Calculate the confidence intervals depending on the desired level of statistical certainty:
- 68% confidence intervals (some certainty; absolute standard error)
- 95% confidence intervals (high certainty; twice the absolute standard error)
Assess whether the confidence intervals corresponding to the desired level of statistical certainty do not overlap.

Answer

ownership (2 categories)	growing stock Plateau*
	NFI4					NFI5
	estimated value	standard error		confidence interval		estimated value	standard error		confidence interval
		relative	absolute	68%	95%		relative	absolute	68%	95%
	m³/ha	±%	±	m³/ha	m³/ha	m³/ha	±%	±	m³/ha	m³/ha
public	340	3	11	329-351	318-362	309	3	11	298-320	287-331
private	447	4	16	431-463	415-479	432	4	17	415-449	398-466
total	386	2	8	378-394	370-402	363	2	9	354-372	345-381
* accessible forest without shrub forest NFI4/NFI5

The 68%-confidence intervals do not overlap in the public forest and the total forest (pairs of values in ), but they do in the private forest (pairs of values in ). At the certainty level of the 68% confidence intervals, it can be concluded that the growing stock per hectare in the public forest and the total forest of the Plateau has decreased. For the private forest the decrease is not statistically certain at this level.

The 95%-confidence intervals overlap in all three categories. At the certainty level of the 95% confidence intervals, it is therefore not certain that the growing stock has decreased, even for the public forest and total forest.

See also examples 6 and 7, in which changes between two inventories are interpreted using the more sensitive metric of net change.

For many target variables in the NFI, it is possible to determine whether a change between two inventories is statistically certain, not only by comparing the states in the two inventories (see example 5), but also by analysing the net change** between the two inventories.

To do this, one must first define the level of statistical certainty that one would like to apply to the statement (as done above):

A net change has occurred with some certainty if the relative standard error is less than 100% or if the confidence interval calculated with the absolute standard error (68% confidence interval) does not include the value 0.
A net change has occurred with high certainty if twice the relative standard error is less than 100% or if the confidence interval calculated with twice the absolute standard error (95% confidence interval) does not include the value 0.

Example 6: Interpretation of net changes with the relative standard error

ownership (2 categories)	change in growing stock from NFI4 to NFI5, Plateau*
	estimated value	standard error
	m³/ha	±%
public	-34	30
private	-9	147
total	-23	34
* accessible forest without shrub forest NFI4/NFI5

Question
Has the growing stock per hectare in the Plateau decreased from NFI4 to NFI5?

Procedure

Define the level of statistical certainty (68% or 95% confidence interval)
Determine whether:
- the relative standard error is less than 100% (certainty level of the 68% confidence interval)
- twice the relative standard error is less than 100% (certainty level of the 95% confidence interval)

Answer

ownership (2 categories)	change in growing stock from NFI4 to NFI5, Plateau*
	estimated value	standard error
		single	double
	m³/ha	±%	±%
public	-34	30	60
private	-9	147	294
total	-23	34	68
* accessible forest without shrub forest NFI4/NFI5

The single relative standard error is less than 100% for both the public forest and the total forest (highlighted values). For the private forest, however, it is greater than 100% (highlighted values). At the certainty level of the 68% confidence interval, it can be concluded that the growing stock in the Plateau has decreased in the public forest and in total. For the private forest, on the other hand, the decrease in stock is not statistically certain at this level.

The same conclusion is reached in this example with the certainty level of the 95% confidence interval, as twice the relative standard error is again less than 100% for both the public forest and the total forest.

Overall, this means that there is high statistical certainty that the growing stock per hectare has decreased in the public forest in the Plateau, as well as overall. For private forests, on the other hand, the decrease in stock is not statistically certain (as twice the relative standard error and the relative standard error are both less than 100%).

Example 7: Interpretation of net changes with the absolute standard error

ownership (2 categories)	change in growing stock from NFI4 to NFI5, Plateau*
	estimated value	standard error
	%	±
public	-10	3
private	-2	3
total	-6	2
* accessible forest without shrub forest NFI4/NFI5

Question
Has the growing stock per hectare in the Plateau decreased from NFI4 to NFI5?

Procedure

Define the level of statistical certainty (68% or 95% confidence interval)
Calculate the confidence interval based on the defined certainty level
- 68% confidence interval with the absolute standard error
- 95% confidence interval with twice the absolute standard error
Determine whether the corresponding confidence interval does not include the value 0

Answer

ownership (2 categories)	change in growing stock from NFI4 to NFI5, Plateau*
	estimated value	standard error		confidence interval
		single	double	68%	95%
	%	±	±	%	%
public	-10	3	6	-13 to -7	-16 to -4
private	-2	3	6	-5 to +1	-8 to +4
total	-6	2	4	-8 to -4	-10 to -2
* accessible forest without shrub forest NFI4/NFI5

Neither the 68% nor the 95% confidence interval includes the value 0 for the public forest or for the total forest. At both certainty levels, this leads to the conclusion that the growing stock in the Plateau has decreased in the public forest and in total. For the private forest, on the other hand, the decrease in stock is not statistically certain (as the confidence intervals include the value 0).

Net changes can be interpreted using the absolute or relative standard error (see examples 6 and 7). It is advisable to use the absolute standard error if the estimated value in the table is shown as a percentage (%; as in example 7), and the relative standard error if the estimated value in the table is shown in absolute terms (m³, m³/ha, pc, m²; as in example 6). This means that the standard error can be taken directly from the table and does not need to be converted.

To assess whether a change is statistically certain, it is advisable to analyse the net change between the two inventories wherever possible. Net changes are more sensitive than status comparisons, which makes it easier to detect differences statistically. See examples 6 and 7 (net change) and 7 (comparison of two results from different inventories).

top

4. When is it not sufficient to consider only the standard error?

The National Forest Inventory (NFI) is a sample-based large-scale inventory whose sample areas are arranged on a grid with a mesh size of 1.4 km × 1.4 km. The NFI was designed in such a way that the growing stock for Switzerland as a whole can be predicted with a maximum standard error of 1%.

If results are requested for individual regions or for individual classes, the standard error quickly becomes much larger. This is because the number of sample areas and subjects (e.g. sample trees, young forest plants, pieces of deadwood) analysed for the queried combination of variable expressions* is considerably lower than for the total.

Example 8: Standard error and combination of variable expressions

region	growing stock
	total		maple		sycamore		Norway maple
	estimated value	standard error	estimated value	standard error	estimated value	standard error	estimated value	standard error
	m³/ha	±%	m³/ha	±%	m³/ha	±%	m³/ha	±%
Switzerland	343	1	12	5	11	5	1	20
production region "Plateau"	363	2	15	10	14	11	0	50
Canton of Aargau	289	7	15	20	13	20	1	63

The standard error increases as the level of detail increases.

Large standard errors are to be expected if:

forest districts are selected as the regional demarcation or results for small cantons (e.g. Appenzell Innerrhoden, Nidwalden) are queried,
a classification variable with many classes is selected (e.g. tree species in 56 classes),
several classification variables are combined with each other (e.g. main tree species and development stage).

Large standard errors are an indication that the estimate may have been based on too small a number of sample areas or subjects and that the result of the estimate therefore may not be reliable.

For the target variable “number of stems of young forest plants with browsing damage” (browsing intensity), an uncertain estimate is not necessarily recognisable by a large standard error. This is because this target variable is a quotient estimator**, which is – due to the survey method – only based on a small number of assessed young forest plants for rarer tree species (e.g. pine, larch, Arolla pine, oak, chestnut). Accordingly, for this target variable one should always check how many young forest plants were assessed for the individual estimates. As a rule of thumb, at least 30 young forest plants per estimate should have been assessed for browsing in order to obtain a reliable estimate.

top

5. Two types of changes?

There are two types of changes in the National Forest Inventory (NFI):

The first type of change involves specific target variables for change components such as increment, fellings or mortality. These target variables are only available for two consecutive measurement cycles, e.g. NFI4 to NFI5. When change components are analysed, the classification variable expression of the second measurement cycle is generally assigned to the first measurement cycle. These analyses therefore do not take into account any change in the expression (e.g. from private to public ownership) from the earlier to the later measurement cycle.
In the second type of change, the difference in target variables, such as stem number, growing stock or forest area, is used to calculate the net change between two measurement cycles. These target variables are usually used to represent states, e.g. that in NFI5, but can also show the net change between any two measurement cycles, e.g. between NFI1 and NFI5. In these net change analyses, the change in expression is taken into account for some of the classification variables, including “tree condition” and “forest, non-forest”. In this way, it can be seen, for example, that the forest area has increased. For the remaining classification variables, the expressions are regarded as static. This means that the most recent state – whether it was assessed in a measurement cycle (e.g. “primary forest function NFI5”) or taken from an external data source (e.g. “protection forest [2022]”) – is assigned to all measurement cycles.

top

6. Change analyses: When are the results (not) additive?

The results are:

additive if they are reported as the total change between two measurement dates. For example, the fellings for the various production regions reported in cubic metres (m³) can be added together to obtain the total fellings for Switzerland.
not additive if they are reported as a change per year (e.g. m³/year). For example, the fellings for the various production regions reported in cubic metres per year (m³/year) cannot be added together to obtain the total fellings for Switzerland.

Example 9: : Additivity/non-additivity of changes

	growing stock: total change between NFI4 and NFI5 (in 1000 m³)*
	Jura		Plateau		Pre-Alps		Alps		Southern Alps		Switzerland
higher/lower altitude zone	1000 m³	±%	1000 m³	±%	1000 m³	±%	1000 m³	±%	1000 m³	±%	1000 m³	±%
lower altitude zone	-3759.0	28	-4909.1	36	-1025.2	133	-317.1	195	3464.1	31	-6546.3	42
higher altitude zone	574.3	117	-328.0	62	1093.0	123	7128.4	21	666.7	93	9134.3	24
total	-3184.7	40	-5237.1	34	67.9	2805	6811.3	23	4130.8	30	2588.1	136
	* accessible forest without shrub forest NFI4/NFI5
	additive

	growing stock: annual change between NFI4 and NFI5 (in 1000 m³/year)*
	Jura		Plateau		Pre-Alps		Alps		Southern Alps		Switzerland
higher/lower altitude zone	1000 m³/year	±%	1000 m³/year	±%	1000 m³/year	±%	1000 m³/year	±%	1000 m³/year	±%	1000 m³/year	±%
lower altitude zone	-421.1	28	-560.6	36	-115.7	133	-35.9	195	389.5	31	-740.7	42
higher altitude zone	64.7	117	-38.3	62	122.4	123	810.4	21	74.9	93	1032.7	24
total	-357.3	40	-598.4	34	7.6	2805	773.8	23	464.4	30	292.7	136
	* accessible forest without shrub forest NFI4/NFI5
	not additive

The non-additivity of changes expressed per year arises because the total change is divided by the average number of years between the two measurement dates in the domain* under consideration, and this average number of years varies slightly depending on the domain.

Example 10: Average number of years per domain

domain		mean number of years*
production region	higher/lower altitude zone
Mittelland	-	8.75
Plateau	higher altitude zone	8.56
Plateau	lower altitude zone	8.76
Southern Alps	-	8.90
Southern Alps	higher altitude zone	8.90
Southern Alps	lower altitude zone	8.89
* between the NFI4 and NFI5 measurements in the accessible forest without shrub forest

top

7. Why is a dot (“.”) sometimes given in the cells for standard error or estimated value?

In the calculation of a results table, data is not always available for all combinations of variable expressions*. In most cases, this indicates that the variable estimated with the relevant target variable does not occur or only occurs very rarely. The value 0 is then usually used. However, as this value is not based on any direct measurements, a dot (“.”) is given for the associated standard error. If reference is made to the assumed value of 0 in the calculation, e.g. in the case of percentages or certain change estimates, no value can be used. In this case, a dot (“.”) is given for the estimated value and the standard error.

For example, no Arolla pines have yet been found and measured in the Plateau in the National Forest Inventory (NFI) (growing stock of Arolla pine by production region). It can therefore be assumed that the values are missing because the Arolla pine actually does not occur in the Plateau, and therefore the growing stock in that region must be 0.

top

8. Why are no standard error values shown in some tables?

The data in these tables originates from a complete survey and not from a sample inventory. Accordingly, it is not necessary to specify a standard error because there is no uncertainty due to sampling.

The forest road network survey that the National Forest Inventory (NFI) periodically carries out with the local forestry services is an example of such a complete survey.

top

9. Negative values for growing stock, increment or fellings?

A negative value is possible if the result could only be calculated on the basis of a few trees. The estimate is therefore not reliable. This is also reflected in the standard error, which is usually extremely large for negative stock, increment or felling values.

Negative values can occur because, when the stemwood volume of the tally trees is determined, the volume estimated solely on the basis of the diameter at breast height (DBH) (tariff volume) is adjusted using the volume of the tally trees estimated on the basis of DBH, diameter at 7 m height and tree height. This procedure enables an unbiased and more accurate calculation of the stemwood volume. However, it can lead to negative values for all target variables that are based on the stemwood volume of the tally trees (e.g. growing stock, increment, fellings) if the number of tally trees in the selected combination of variable expressions* is small.

top

NFI4
number of stems
main tree species · diameter at breast height (10 classes)
regional demarcation: biogeographical region
unit: 1000 n
evaluation area: accessible forest without shrub forest NFI4/NFI5
grid: 1.4 km grid, subgrids 1-5
state 2009/17
		biogeographical region
		Jura		Plateau		Northern Alps		Western Central-Alps		Eastern Central-Alps		Southern Alps		Switzerland
main tree species	diameter at breast height (10 classes)	1000 n	±%	1000 n	±%	1000 n	±%	1000 n	±%	1000 n	±%	1000 n	±%	1000 n	±%
n/a	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	12-20 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	21-30 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	31-40 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	41-50 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	51-60 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	61-70 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	71-80 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	81-90 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	91-100 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	>100 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	0	.	0	.	0	.	0	.	0	.	0	.	0	.
spruce	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	12-20 cm	7197	12	12288	10	23291	7	6683	13	14651	9	4682	14	68792	4
	21-30 cm	4776	12	7267	10	15966	7	4815	14	8561	9	3060	13	44446	4
	31-40 cm	3223	11	4509	9	11790	6	2546	12	5611	8	2206	15	29885	3
	41-50 cm	2344	8	2858	8	8032	5	1485	12	3590	8	1292	14	19601	3
	51-60 cm	1489	10	1829	9	4946	6	789	14	1786	10	798	15	11636	4
	61-70 cm	563	14	722	13	2083	8	252	23	659	13	366	18	4645	5
	71-80 cm	167	23	291	18	955	11	83	36	264	20	196	23	1956	7
	81-90 cm	36	54	94	28	296	22	55	58	122	26	90	31	692	13
	91-100 cm	8	100	14	71	74	32	7	100	15	72	14	71	132	24
	>100 cm	7	100	21	58	29	50	7	100	30	50	19	72	112	26
	total	19811	8	29892	7	67462	5	16721	10	35288	7	12722	10	181897	3
fir	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	12-20 cm	6877	9	6202	12	6947	10	367	35	372	30	586	33	21351	6
	21-30 cm	3594	12	2697	13	3866	10	273	36	206	38	409	34	11044	6
	31-40 cm	2248	12	1935	12	2660	10	139	51	110	33	272	35	7364	6
	41-50 cm	1859	10	1470	11	2006	9	116	43	126	26	140	30	5716	5
	51-60 cm	1031	12	1183	11	1346	9	62	49	106	31	163	30	3890	6
	61-70 cm	414	16	650	13	739	14	15	100	46	38	22	58	1886	8
	71-80 cm	144	24	197	21	286	17	15	71	47	42	30	49	719	11
	81-90 cm	51	38	69	34	55	40	7	100	7	100	8	100	197	20
	91-100 cm	22	58	22	58	7	100	0	.	0	.	18	72	68	34
	>100 cm	0	.	14	71	14	71	0	.	0	.	0	.	28	50
	total	16238	7	14440	8	17926	7	993	31	1021	21	1646	25	52265	4
pine	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	12-20 cm	142	43	364	63	568	46	2426	28	2350	24	100	74	5952	16
	21-30 cm	452	36	496	33	462	43	1722	22	1069	26	155	58	4357	13
	31-40 cm	660	22	526	22	283	40	730	21	823	25	61	58	3085	11
	41-50 cm	349	23	468	17	205	46	171	31	348	23	35	53	1576	11
	51-60 cm	104	29	244	19	73	41	86	45	163	28	14	100	685	13
	61-70 cm	15	71	55	35	11	100	0	.	57	39	7	100	145	23
	71-80 cm	7	100	7	100	0	.	0	.	14	71	0	.	28	50
	81-90 cm	0	.	7	100	0	.	0	.	7	100	0	.	14	71
	91-100 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	>100 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	1729	20	2167	18	1603	35	5137	20	4832	18	373	53	15841	10
larch	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	12-20 cm	0	0	472	72	545	40	2814	15	1527	20	3137	16	8495	10
	21-30 cm	0	0	240	49	177	47	1767	18	1152	22	2518	14	5853	9
	31-40 cm	45	54	193	32	62	58	1434	17	1099	16	1420	15	4253	9
	41-50 cm	21	74	88	38	43	59	1120	17	880	14	716	14	2868	9
	51-60 cm	22	58	83	35	57	50	805	14	662	15	539	14	2168	8
	61-70 cm	0	.	27	50	14	71	317	23	234	22	209	22	800	13
	71-80 cm	7	100	16	71	7	100	173	24	112	27	130	29	444	15
	81-90 cm	0	.	0	.	0	.	53	42	54	43	60	39	167	24
	91-100 cm	0	.	0	.	0	.	14	71	8	100	7	100	30	50
	>100 cm	0	.	0	.	0	.	0	.	8	100	22	74	29	61
	total	94	37	1119	34	904	31	8498	11	5735	12	8758	11	25108	6
Arolla pine	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	12-20 cm	0	.	0	.	0	.	611	31	1489	23	69	71	2170	18
	21-30 cm	0	.	0	.	0	.	634	26	1016	26	35	71	1684	18
	31-40 cm	0	.	0	.	0	.	250	32	503	25	37	100	790	19
	41-50 cm	0	.	0	.	10	100	126	39	224	22	0	.	359	19
	51-60 cm	0	.	0	.	0	.	28	50	93	32	0	.	121	27
	61-70 cm	0	.	0	.	0	.	14	71	35	45	0	.	49	38
	71-80 cm	0	.	0	.	0	.	35	44	14	71	0	.	50	37
	81-90 cm	0	.	0	.	0	.	21	58	7	100	7	100	36	45
	91-100 cm	0	.	0	.	0	.	7	100	0	.	0	.	7	100
	>100 cm	0	.	0	.	0	.	7	100	7	100	0	.	14	71
	total	0	.	0	.	10	100	1734	22	3389	19	148	75	5280	14
other conifers	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	12-20 cm	487	34	425	25	554	42	121	62	659	35	17	100	2264	17
	21-30 cm	171	40	207	37	121	62	0	0	53	58	17	100	569	23
	31-40 cm	14	71	113	45	22	76	0	.	0	.	0	.	149	36
	41-50 cm	7	100	102	40	0	.	0	.	0	.	8	100	117	36
	51-60 cm	0	.	68	49	0	.	0	.	0	.	8	100	76	45
	61-70 cm	8	100	47	47	0	.	0	.	0	.	0	.	54	43
	71-80 cm	8	100	41	58	0	.	0	.	0	.	0	.	49	51
	81-90 cm	8	100	7	100	0	.	0	.	0	.	0	.	15	71
	91-100 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	>100 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	702	28	1010	20	697	42	121	62	712	34	51	75	3293	15
beech	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	12-20 cm	8932	8	9009	7	9527	9	978	34	882	26	6354	14	35681	5
	21-30 cm	6428	9	6011	7	6701	9	355	42	755	29	3866	16	24116	5
	31-40 cm	4951	8	3455	9	3810	11	177	40	585	24	1174	17	14151	5
	41-50 cm	2887	7	2611	8	2281	10	79	61	281	27	562	18	8702	4
	51-60 cm	1226	11	1542	9	1097	12	15	100	111	32	253	20	4244	5
	61-70 cm	264	19	539	13	330	18	0	.	27	50	121	31	1281	9
	71-80 cm	82	39	182	23	103	29	0	.	18	74	44	41	430	15
	81-90 cm	0	.	57	39	21	58	7	100	0	.	22	58	108	27
	91-100 cm	0	.	7	100	7	100	0	.	0	.	0	.	14	71
	>100 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	24771	6	23414	5	23877	7	1611	34	2659	22	12396	13	88727	3
maple	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	12-20 cm	3048	15	2760	15	5319	12	614	30	480	33	1064	30	13285	7
	21-30 cm	1640	12	1908	16	3518	11	130	38	431	36	245	37	7873	7
	31-40 cm	806	16	741	16	1473	13	36	71	194	41	74	43	3324	8
	41-50 cm	376	16	233	21	460	15	22	100	36	61	7	100	1135	9
	51-60 cm	119	24	91	34	172	33	0	.	52	41	8	100	441	17
	61-70 cm	7	100	28	50	62	44	0	.	0	.	0	.	96	32
	71-80 cm	9	100	0	.	13	71	0	.	8	100	0	.	30	50
	81-90 cm	0	.	0	.	6	100	0	.	0	.	0	.	6	100
	91-100 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	>100 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	6006	10	5760	11	11023	9	802	29	1202	29	1398	26	26191	5
ash	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	12-20 cm	1260	18	3096	15	2932	14	573	31	565	36	1434	25	9860	8
	21-30 cm	709	21	1745	15	2363	15	365	39	334	48	601	30	6117	9
	31-40 cm	616	18	1487	14	1086	19	278	77	48	60	90	38	3606	11
	41-50 cm	254	24	877	13	443	19	15	100	14	71	62	48	1665	9
	51-60 cm	111	25	469	18	114	31	7	100	7	100	13	100	721	14
	61-70 cm	45	41	96	38	44	41	0	.	0	.	10	100	195	23
	71-80 cm	7	100	48	41	18	72	0	.	6	100	0	.	79	32
	81-90 cm	0	.	24	58	0	.	0	.	0	.	0	.	24	58
	91-100 cm	0	.	7	100	0	.	0	.	0	.	0	.	7	100
	>100 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	3002	13	7848	9	6999	11	1238	35	975	39	2211	24	22274	6
oak	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	12-20 cm	1046	42	693	32	234	50	697	34	0	.	1112	35	3782	18
	21-30 cm	516	28	1282	23	179	38	270	38	0	0	703	23	2949	13
	31-40 cm	338	25	613	19	40	52	47	59	7	100	304	27	1350	13
	41-50 cm	175	29	509	16	47	49	21	75	7	100	171	34	931	13
	51-60 cm	21	58	302	20	21	58	0	.	14	100	24	59	383	17
	61-70 cm	20	73	107	27	0	.	0	.	0	.	15	71	142	24
	71-80 cm	0	.	54	38	8	100	0	.	7	100	0	.	69	33
	81-90 cm	0	.	43	41	0	.	0	.	0	.	0	.	43	41
	91-100 cm	0	.	16	100	0	.	0	.	0	.	0	.	16	100
	>100 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	2116	27	3620	16	528	30	1035	32	35	100	2329	23	9664	11
sweet chestnut	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	12-20 cm	17	100	0	0	147	100	0	0	0	.	5834	18	5998	17
	21-30 cm	0	.	0	.	21	100	37	100	0	.	4171	15	4229	15
	31-40 cm	0	.	7	100	42	100	29	73	0	.	1353	19	1430	18
	41-50 cm	0	.	0	.	15	70	0	.	0	.	524	19	538	19
	51-60 cm	0	.	0	.	0	.	0	.	0	.	249	25	249	25
	61-70 cm	0	.	0	.	27	77	0	.	0	.	68	33	95	32
	71-80 cm	0	.	0	.	10	100	0	.	0	.	76	37	85	34
	81-90 cm	0	.	0	.	0	.	8	100	0	.	45	46	53	42
	91-100 cm	0	.	0	.	0	.	0	.	0	.	30	61	30	61
	>100 cm	0	.	0	.	0	.	0	.	0	.	57	45	57	45
	total	17	100	7	100	261	92	74	77	0	.	12406	13	12765	13
other broadleaves	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	12-20 cm	2696	14	4292	11	7050	12	3391	17	3916	21	11208	12	32553	6
	21-30 cm	752	20	1545	15	1999	16	976	21	799	28	4464	13	10535	7
	31-40 cm	389	23	743	19	450	20	126	40	119	35	1375	15	3202	9
	41-50 cm	142	41	353	20	168	28	38	45	29	49	304	20	1033	12
	51-60 cm	28	61	158	40	165	47	23	57	26	59	55	43	454	23
	61-70 cm	14	70	48	49	18	57	0	.	12	100	8	100	99	31
	71-80 cm	0	.	21	58	6	100	0	.	0	.	7	100	35	45
	81-90 cm	0	.	14	71	0	.	0	.	0	.	0	.	14	71
	91-100 cm	0	.	30	81	0	.	0	.	0	.	0	.	30	81
	>100 cm	0	.	37	100	0	.	0	.	0	.	0	.	37	100
	total	4021	13	7241	10	9855	11	4554	16	4902	20	17420	10	47992	5
indeterminable	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	12-20 cm	0	0	0	0	0	0	0	0	0	0	0	0	0	0
	21-30 cm	0	0	0	.	0	0	0	.	0	0	0	0	0	0
	31-40 cm	0	0	0	0	0	0	0	.	0	0	0	0	0	0
	41-50 cm	0	0	0	0	0	0	0	0	0	0	0	0	0	0
	51-60 cm	0	.	0	.	0	0	0	0	0	.	0	.	0	0
	61-70 cm	0	.	0	.	0	0	0	0	0	.	0	.	0	0
	71-80 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	81-90 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	91-100 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	>100 cm	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	total	0	0	0	0	0	0	0	0	0	0	0	0	0	0
total	n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
	12-20 cm	31702	5	39600	5	57114	5	19277	8	26891	7	35598	6	210183	2
	21-30 cm	19038	5	23398	5	35373	4	11343	9	14375	7	20244	5	123772	2
	31-40 cm	13290	5	14322	5	21719	4	5793	9	9100	7	8366	6	72590	2
	41-50 cm	8413	4	9570	4	13708	4	3193	9	5536	6	3821	6	44241	2
	51-60 cm	4151	5	5970	5	7990	4	1815	10	3019	7	2124	8	25069	2
	61-70 cm	1350	9	2317	7	3326	7	598	17	1071	10	826	11	9488	3
	71-80 cm	432	15	857	10	1406	9	306	18	491	14	483	14	3974	5
	81-90 cm	95	30	314	16	378	18	152	28	197	21	232	19	1369	8
	91-100 cm	29	50	95	36	89	29	29	50	23	58	68	37	334	17
	>100 cm	7	100	72	55	43	41	14	71	44	41	97	34	278	21
	total	78507	3	96517	3	141146	3	42520	7	60748	5	71859	4	491296	1

Table citation

Abegg, M.; Ahles, P.; Allgaier Leuch, B.; Cioldi, F.; Didion, M.; Düggelin, C.; Fischer, C.; Herold, A.; Meile, R.; Rohner, B.; Rösler, E.; Speich, S.; Temperli, C.; Traub, B.,
2023: Swiss national forest inventory - Result table No. 1355074. Birmensdorf, Swiss Federal Research Institute WSL

back